Electric Infrared Heating Controls - 208 V, 200 Amps, NEMA 1, 24V Circuit Contactor Panel - TPI FPC8240
Get attractive price on model FPC8240, 208 V, 200 Amps Contactor Panel for use with single & two-stage thermostats (requires 2-contactors), snow & ice detector (APS-3C) control equipment. This infrared heater accessory by TPI is easy to install, pre wired at factory. NEMA 1 enclosures included!
| Contactor Panel - TPI FPC8240 Specifications |
|---|
| Amps | 200 |
|---|
| Voltage | 208 V |
|---|
| Dimension | 6.75" D x 24" W x 30" H |
|---|
| Nema Config | Nema 1 |
|---|
| Control System | 24 V |
|---|
| Weight | 88 Lbs. |
|---|
| UPC | 686334486514 |
|---|
208 V, 200 Amps Contactor Panel - TPI FPC8240 Features:
- Factory pre-wired for quick installation and for use with the following control equipment: Single & two-stage thermostats (requires 2-contactors), snow & ice detector (APS-3C)
- NEMA 1 enclosures included
- Contact factory for 3R, 4, 4X, & NEMA 12 enclosure types
- Max 50-Amp branch circuit fusing
- Step-down transformer and secondary fusing for 24 or 120 volt control circuit
- Optional Disconnect Switch available for all panel circuit types, amps & voltage sizes
- 3-Phase load rated
- Fuses are NOT included
- UL Listed