Home > Tankless Water Heaters > Venting and Accessories > Bosch Venting and Accessories >
3" Wall Support Z Flex Z Vent SS Venting Z-Flex 2SVSWS03
3" Wall Support Z Flex Z Vent SS Venting Z-Flex 2SVSWS03

3" Wall Support Z Flex Z Vent SS Venting Z-Flex 2SVSWS03

Brand: Z-Flex
SKU: 2SVSWS03
Mfg Number:
Availability: In Stock Usually ships In 4-6 Business Days

Product Information
Retail: $44.62 Price: $39.84
 
You Save: $4.78 (10.7%)


Description

Z-Flex Venting Accessories - 2SVSWS03 3" Wall Support Z Flex Z Vent SS Venting - For AquaStar 2700ES, 2400ES, 2400E Models

3" Wall Support Z-Flex Z-Vent stainless steel venting (2SVSWS03) for the Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX / Bosch 635ES tankless water heater provide support to the vent system while maintaining proper clearance to combustible materials.

Vertical supports are required after any 10 foot run. These vent supports may also be used to support long horizontal runs, which require support every 6 feet.

The Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch AquaStar 2400E requires 3" stainless steel venting for Category III Gas Appliances. Our Z-Flex Z-Vent venting meets these requirements and is rated AL29-4C.

Z-Flex Z-Vent is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

Specifications

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

Product PDF's and Other Resources
RELATED PRODUCTS
Service Disabled Veteran Owned Small Business - pending | Minority Business Enterprise