Z-Flex Venting Accessories - 2SVEEWCF0390 3" x 90 Degree Elbow Z Flex Z Vent SS Venting - For AquaStar 2700ES, 2400ES, 2400E Models

3" x 90 Degree Elbow Z-Flex Z-Vent stainless steel venting (2SVEEWCF0390) for the Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX / Bosch 635ES tankless water heater.

The dimensions of the 90 Degree Elbow are 6" vertical and 6" horizontal, from center to center.

The Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch AquaStar 2400E requires 3" stainless steel venting for Category III Gas Appliances. Our Z-Flex Z-Vent venting meets these requirements and is rated AL29-4C.

Z-Flex Z-Vent is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

Z-Flex 3" x 90 Degree Elbow Z Flex Z Vent SS Venting 2SVEEWCF0390 Resources: