The 24" electric baseboard heater by Cadet uses convection to circulate air. With superior designing and proper placement under a window area, model 2F350A causes air to flow naturally. The cold air falls from the window area as the warm air rises from the heater, causing the air to tumble gently throughout the room. This baseboard heater is the number one choice for low cost installation, and the quiet operation makes it the preferred heater for bedrooms.
This electric baseboard heater shall be UL Listed and dual rated from 208V to 240V. Element shall be steel sheathed calrod element with channel shaped aluminum fins. A full length capillary sensor tube shall be an integral part of each unit. Case, cover, and deflector shall be made of 24 gauge steel with 20 gauge junction box containing a grounding pigtail. All metal pieces shall be finished with a powder coat paint system.
This baseboard heater works best when placed under a window and at least 12" away from furniture or other objects. Keep at least a 12" minimum from objects hanging above ( i.e., drapes ). Do not install below electrical outlets. This electric baseboard heater may be placed directly on the floor and mounted to the wall. There are only a few exceptions listed in the installation instructions. An optional Cadet MTX mounting tool is helpful for installing the heater. Originally designed for mounting baseboard heaters, its applications are unlimited.
|Cadet Baseboard Heater 2F350A Specifications|
|BTUs||1194 / 894 BTU|
|Carton Dimensions||7.25" H x 24" L x 2.875" D|
|Product Dimensions||6.75" H x 24" L x 2.5" D |
|Voltage||240 V / 208 V|
|Watts ||350 W ( 240V ) / 262 W ( 208V )|
|Amps||1.46 A ( 240V ) / 1.26 A ( 208V )|
Cadet Baseboard Heater 2F350A Features:
- Oversized high temperature limit switch with full length capillary sensor tube
- Durable steel sheathed element with a limited lifetime warranty
- Easy installation with pre-punched case at 1" intervals
- Rugged steel construction
- Almond powder coat paint for a durable finish
- UL listed