We bring you Com-Pak Twin Plus Fan Forced Heater, model CSTC302TW, by Cadet. The Com-Pak Twin Plus is the ideal choice for heating large areas such as an open foyer with a single heater. Nichrome coil element is wrapped around mica insulators for durability and quick heat. The powder coat paint process eliminates sharp metal edges. Twin heaters connected behind a single grill provide all the benefits of this amazing unit.
Fan forced electric air heater shall be UL Listed and dual field rated at 208V/240V. A painted 20 gauge wall mounting can with four knockouts and 79 cubic inch wiring compartment shall be provided with each complete heater. Heater shall be of unitized construction and attach to the wall can with two screws and shall be self-contained and completely separate from the wall mounting can. Two elements shall be nichrome type wrapped on mica insulators with two oversized 16 amp at 240V high temperature manual power reset limit switches and two over temperature thermal backup fuses. Two independent two-stage centrifugal blowers shall be driven by impedance protected motors. The motors shall be totally isolated from the heating chamber. Metal grill shall be of one piece, 20 gauge construction and finished with a powder coat paint system.
For optimum comfort, a Cadet electronic thermostat may be used (check amperage rating). This fan heater and thermostats work best when installed on an inside wall. UL requires heater to be placed at a minimum distance of 6" from adjacent surfaces and 4.5" from the floor. Manufacturer recommends installation 12" from all surfaces. A 3' (91.44cm) minimum clearance is recommended for furniture or other objects placed directly in front of heater.
Note: Manufacturer recommends installing heater assembly after walls are finished. Heater must be cleaned every six months minimum.
|Cadet Com-Pak Twin Plus Fan Forced Heater CSTC302TW Specifications|
|Rough In Dimensions||14.75" W x 10.25" H x 4" D|
|Wall Can Dimensions||14.5"W x 11.125"H x 4"D|
|Grill Dimensions||16.25"W x 12"H|
|Voltage||208 / 240 V|
|Box Weight||12.35 Lbs.|
Cadet Com-Pak Twin Plus Fan Forced Heater CSTC302TW Features:
- Provides instant warmth and comfort
- Perfect for smaller areas or larger areas needing the dispersed heat created by multiple heaters. Takes up less wall space than baseboards or larger in-wall heaters.
- Primary & Secondary Thermal Safeguards:
With robust, heavy duty high temperature manual power reset
Over temperature one-time thermal fuse
- Nichrome coil element wrapped around mica insulators for durability and quick heat
- Powder coat paint process eliminates sharp metal edges
- Wall can designed for ease of installation
- Horizontal or vertical grill mounting options
- Built-in single pole thermostat
- 3' clearance in front; 12" above; 6" to sides
- 2 year warranty
- Easy installation
- UL listed
- Factory tested