Commercial/Warehouse Heaters - Power Vented Natural Gas Unit Heater w/ Belt Driven Blower - Dayton 2HYW3 - 240000 Btu

Check out Dayton's Power Vented Natural Gas Unit Heater with Belt Driven Blower. Model no 2HYW3 features a heating system that gives 240000 Btu heat output that can be used at many construction or commercial sites. This unit also has Intermittent Spark ignition system and 20 Gauge aluminized Steel construction to give your investment a long life that it deserves.it has removable type burner access panel for fast, easy inspection and maintenance. The provided Fan time delay eliminates cold air at startup.

Dayton Power Vented Natural Gas Unit Heater 2HYW3 Specifications
Item	Unit Heater
Type	Power Vented, Electronic Ignition, With Belt Driven Blower
Fuel Type	Natural Gas
BtuH Input	300000
BtuH Output	240000
Voltage	120 V
Frequency	60 Hz
Full Load Amps	15.2
CFM	3950
Air Temp. Rise	56 F
Free Air (CFM)	3950
65F Rise (CFM)	3400
80(F) Rise (CFM)	2780
Gas Connection	3/4"
Flue Dia.	6"
Product Dimensions	39-1/8"H x 26-1/8"W x 47"D
O.C. Mounting	22-3/4"
Installation Height	8 to 20 Ft.
Ignition System	Intermittent Spark
Indoor Air Discharge Height	18"
Indoor Air Discharge Width	23-5/8"
Max. External SP (In. WC)	0.2
Requires	24V Thermostat
Primary Heat Exchanger Material	20 Gauge Aluminized Steel
Application	More Than 2000' Above Sea Level Require Burner Orifices To Be Derated
Agency Compliance	CSA
Warranty	1 Year All Components
Note: Use single- or double-wall vent pipe when venting vertically, or single-wall pipe when venting horizontally