Commercial/Warehouse Heaters - Power Vented Natural Gas Unit Heater w/ Belt Driven Blower - Dayton 4DG09 - 100000 Btu
Get this Power Vented Natural Gas Unit Heater with Belt Driven Blower from Dayton. Model 4DG09 comes with 100000 Btu and Intermittent Spark ignition system. This product requires an additional 24V thermostat for better results that you expect. The burners are isolated from dust, humidity, and nonhazardous chemicals, to allow heating of special environment. Its CSA approval and 1 year all component warranty that makes it a must buy product.
| Dayton Power Vented Natural Gas Unit Heater 4DG09 Specifications |
|---|
| Item | Unit Heater |
|---|
| Type | Power Vented, Separated Combustion With Belt Drive Blower |
|---|
| Fuel Type | Natural Gas |
|---|
| BtuH Input | 125000 |
|---|
| BtuH Output | 100000 |
|---|
| Voltage | 120 V |
|---|
| Frequency | 60 Hz |
|---|
| Full Load Amps | 6.6 |
|---|
| CFM | 1575 |
|---|
| Air Temp. Rise | 59 F |
|---|
| Free Air (CFM) | 1575 |
|---|
| Gas Connection | 1/2" |
|---|
| Flue Dia. | 4" |
|---|
| Product Dimensions | 39-1/8"H x 48-1/8"W x 51"D |
|---|
| O.C. Mounting | 44-3/4" |
|---|
| Installation Height | 8 to 20 Ft. |
|---|
| Ignition System | Intermittent Spark |
|---|
| Indoor Air Discharge Height | 18" |
|---|
| Indoor Air Discharge Width | 45-5/8" |
|---|
| Max. External SP (In. WC) | 0.2 |
|---|
| Requires | 24V Thermostat |
|---|
| Primary Heat Exchanger Material | 20 Gauge Aluminized Steel |
|---|
| Application | More Than 2000' Above Sea Level Require Burner Orifices To Be Derated |
|---|
| Agency Compliance | CSA |
|---|
| Warranty | 1 Year All Components |
|---|
| Note: For applications in altitudes above 2000 ft., the burner orifices need to be derated. Consult a qualified contractor or call your local branch to order orifices |
Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.
34-1/16"H x 20-5/8"W x 44-3/8"D