Commercial/Warehouse Heaters - Power Vented Natural Gas Unit Heater w/ Belt Driven Blower - Dayton 4DG17 - 180000 Btu
Get this Power Vented Natural Gas Unit Heater with Belt Driven Blower manufactured by Dayton. Model no. 4DG17 uses outside air for combustion, enabling operation in areas having slight negative pressures near exhaust fan with no adverse effect upon combustion or venting. The Burners are isolated from dust, humidity, and nonhazardous chemicals, to allow heating of special environment. The manufacturer provided you with 1 year all component warranty and CSA certificate.
| Dayton Power Vented Natural Gas Unit Heater 4DG17 Specifications |
|---|
| Item | Unit Heater |
|---|
| Type | Power Vented, Separated Combustion With Belt Drive Blower |
|---|
| Fuel Type | Natural Gas |
|---|
| BtuH Input | 225000 |
|---|
| BtuH Output | 180000 |
|---|
| Voltage | 120 V |
|---|
| Frequency | 60 Hz |
|---|
| Full Load Amps | 12 |
|---|
| CFM | 2600 |
|---|
| Air Temp. Rise | 64 F |
|---|
| Free Air (CFM) | 2600 |
|---|
| Gas Connection | 3/4" |
|---|
| Flue Dia. | 5" |
|---|
| Product Dimensions | 39-1/16"H x 28-7/8"W x 50-7/8"D |
|---|
| O.C. Mounting | 25-3/4" |
|---|
| Installation Height | 8 to 20 Ft. |
|---|
| Ignition System | Intermittent Spark |
|---|
| Indoor Air Discharge Height | 18" |
|---|
| Indoor Air Discharge Width | 26-3/8" |
|---|
| Max. External SP (In. WC) | 0.2 |
|---|
| Requires | 24V Thermostat |
|---|
| Primary Heat Exchanger Material | 20 Gauge Aluminized Steel |
|---|
| Burner Air Inlet Size | 5 |
|---|
| Application | More Than 2000' Above Sea Level Require Burner Orifices To Be Derated |
|---|
| Agency Compliance | CSA |
|---|
| Warranty | 1 Year All Components |
|---|
| Note: For applications in altitudes above 2000 ft., the burner orifices need to be derated. Consult a qualified contractor or call your local branch to order orifices |