Commercial/Warehouse Heaters - Power Vented Natural Gas Unit Heater w/ Belt Driven Blower - Dayton 4DG19 - 200000 Btu
Bringing you Power Vented Natural Gas Unit Heater with Belt Driven Blower manufactured by Dayton. Model no. 4DG19 comes with a 240000 Btu heating output that keeps your work that keeps you satisfied with its efficiency, being it a commercial or a warehouse space. This product uses outside air for combustion, enabling operation in areas having slight negative pressures with no adverse effect upon combustion or venting. The manufacturer also provides 1 year all component warranty and CSA approval to keep you tension free and make full use of your heater.
| Dayton Power Vented Natural Gas Unit Heater 4DG19 Specifications |
|---|
| Item | Unit Heater |
|---|
| Type | Power Vented, Separated Combustion With Belt Drive Blower |
|---|
| Fuel Type | Natural Gas |
|---|
| BtuH Input | 250000 |
|---|
| BtuH Output | 200000 |
|---|
| Voltage | 120 V |
|---|
| Frequency | 60 Hz |
|---|
| Full Load Amps | 12 |
|---|
| CFM | 2850 |
|---|
| Air Temp. Rise | 65 F |
|---|
| Free Air (CFM) | 2850 |
|---|
| Gas Connection | 3/4" |
|---|
| Flue Dia. | 5" |
|---|
| Product Dimensions | 39-1/16"H x 31-5/8"W x 48"D |
|---|
| O.C. Mounting | 28-1/2" |
|---|
| Installation Height | 8 to 20 Ft. |
|---|
| Ignition System | Intermittent Spark |
|---|
| Indoor Air Discharge Height | 18" |
|---|
| Indoor Air Discharge Width | 29-1/8" |
|---|
| Max. External SP (In. WC) | 0.2 |
|---|
| Requires | 24V Thermostat |
|---|
| Primary Heat Exchanger Material | 20 Gauge Aluminized Steel |
|---|
| Burner Air Inlet Size | 5 |
|---|
| Application | More Than 2000' Above Sea Level Require Burner Orifices To Be Derated |
|---|
| Agency Compliance | CSA |
|---|
| Warranty | 1 Year All Components |
|---|
| Note: For applications in altitudes above 2000 ft., the burner orifices need to be derated. Consult a qualified contractor or call your local branch to order orifices |
Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.
39-1/16"H x 31-5/8"W x 48"D