Commercial/Warehouse Heaters - Power Vented Natural Gas Unit Heater w/ Belt Driven Blower - Dayton 4DG23 - 280000 Btu
Introducing the new Power Vented Natural Gas Unit Heater w/ Belt Driven Blower brought to you by Dayton. Model no. 4DG23 is constructed using 20 Gauge Aluminized Steel that gives it a great look. This unit comes with intermittent spark ignition system that makes it easy to start and use. It uses outside air for combustion which makes it operational in areas having slight negative pressures with no effect on the efficiency or combustion. The producers provide an year's all component warranty and CSA certification.
| Dayton Power Vented Natural Gas Unit Heater 4DG23 Specifications |
|---|
| Item | Unit Heater |
|---|
| Type | Power Vented, Separated Combustion With Belt Drive Blower |
|---|
| Fuel Type | Natural Gas |
|---|
| BtuH Input | 350000 |
|---|
| BtuH Output | 280000 |
|---|
| Voltage | 120 V |
|---|
| Frequency | 60 Hz |
|---|
| Full Load Amps | 15.4 |
|---|
| CFM | 4600 |
|---|
| Air Temp. Rise | 56 F |
|---|
| Free Air (CFM) | 4600 |
|---|
| Gas Connection | 3/4" |
|---|
| Flue Dia. | 6" |
|---|
| Product Dimensions | 39-1/16"H x 42-5/8"W x 50-7/8"D |
|---|
| O.C. Mounting | 39-1/2" |
|---|
| Installation Height | 8 to 20 Ft. |
|---|
| Ignition System | Intermittent Spark |
|---|
| Indoor Air Discharge Height | 18" |
|---|
| Indoor Air Discharge Width | 40-1/8" |
|---|
| Max. External SP (In. WC) | 0.2 |
|---|
| Requires | 24V Thermostat |
|---|
| Primary Heat Exchanger Material | 20 Gauge Aluminized Steel |
|---|
| Burner Air Inlet Size | 6 |
|---|
| Application | More Than 2000' Above Sea Level Require Burner Orifices To Be Derated |
|---|
| Agency Compliance | CSA |
|---|
| Warranty | 1 Year All Components |
|---|
| Note: For applications in altitudes above 2000 ft., the burner orifices need to be derated. Consult a qualified contractor or call your local branch to order orifices |