Down Flow Unit Heaters - TPI 7 KW 240V Downflow Unit Heater - 25598 BTU - H1H2607CA1
Model H1H2607CA1 is a perfect blend of highest quality, exceptional service and value. TPI presents 7 KW 240V Downflow Unit Heater with 25598 Btu capacity. This unit comes with 16 ga. steel cabinet with epoxy powder coated finish and control compartment with a hinged and latched access door. It has corrosion resistant element with steel sheath and steel spiral fins. The heater is equipped with Fan Purge which allows Fan to operate after elements are de-energized to purge residual heat.
| TPI Downflow Unit Heater H1H2607CA1 Specifications |
|---|
| BTU | 25598 |
|---|
| KW | 7.5 |
|---|
| Volts | 240 |
|---|
| Phase | 1 |
|---|
| AMPS | 31.3 |
|---|
| Control volts | 24 |
|---|
| Temp. Rise | 45 deg F |
|---|
| CFM | 560 |
|---|
| Weight | 75 Lbs. |
|---|
| UPC | 686334715836 |
|---|
TPI Downflow Unit Heater H1H2607CA1 Features:
CONSTRUCTION:
- 16 ga. steel cabinet with epoxy powder coated finish and control compartment with a hinged and latched access door
- OSHA guards standard with all models
HEATING ELEMENT:
- Corrosion resistant element with steel sheath and steel spiral fins
OVERHEAT PROTECTION:
- This unit equipped with manual reset limit controls to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR:
- Totally enclosed, 1 speed, 1 phase permanently lubricated, thermally protected motors with this 7.5 kw unit.
- Axial flow fan blade - 1570 RPM max.
- This model is equipped with Fan Purge which allows Fan to operate after elements are de-energized to purge residual heat
TEMPERATURE CONTROLS:
- This 277v unit have In-Built 24 volt transformer for low voltage remote thermostat application.
DISCONNECT SWITCH:
- The model equipped with In-Built Disconnect.
INSTALLATION:
- Unit can be mounted using optional mounting bracket or field constructed angle iron bracket
- Not recommended for mounting with threaded rod or chain.
- UL Listed