Down Flow Unit HeatersTPI 15 KW, 240V Downflow Unit Heater - H3H2615CA1
Introducing 15 KW Downflow Unit Heater by TPI. Model H3H2615CA1 is equipped with 51195 BTU, 16 ga. steel cabinet with epoxy powder coated finish, control compartment with a hinged and latched access door, totally enclosed, 1 speed, 1 phase permanently lubricated and thermally protected motors and in-built disconnect. It is a perfect blend of highest quality, exceptional performance and value.
| Downflow Unit Heater - TPI H3H2615CA1 Specifications |
|---|
| Wattage | 15 KW |
|---|
| BTU | 51195 |
|---|
| Voltage | 240 |
|---|
| Phase | 3 |
|---|
| Ampere | 36.1 |
|---|
| Control Voltage | 24 |
|---|
| Temperature Rise | 39 F |
|---|
| CFM | 1200 |
|---|
| Dimensions | 15"H x 20-1/2"W x 20-1/2"D |
|---|
| Weight | 75 Lbs. |
|---|
| UPC | 686334715973 |
|---|
Downflow Unit Heater - TPI H3H2615CA1 Features:
CONSTRUCTION:
- 16 ga. steel cabinet with epoxy powder coated finish and control compartment with a hinged and latched access door
- OSHA guards standard with all models
HEATING ELEMENT:
- Corrosion resistant element with steel sheath and steel spiral fins
OVERHEAT PROTECTION:
- All units come equipped with manual reset limit controls to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR:
- Totally enclosed, 1 speed, 1 phase permanently lubricated, thermally protected motors with unit bearings
- Axial flow fan blade - 1570 RPM max.
- All Models equipped with Fan Purge which allows Fan to operate after elements are de-energized to purge residual heat
TEMPERATURE CONTROLS:
- Units has In-Built 24 volt transformer for low voltage remote thermostat application
DISCONNECT SWITCH:
- All Models equipped with In-Built Disconnect
INSTALLATION:
- Unit can be mounted using optional mounting bracket or field constructed angle iron bracket
- Not recommended for mounting with threaded rod or chain