We present you 20 KW Downflow Unit Heater manufactured by TPI. Model U3H2620CA4 is a perfect blend of highest quality, exceptional performance and value. It features 68260 BTU, 16 ga. steel cabinet with epoxy powder coated finish, control compartment with a hinged and latched access door, fan fan purge which allows fan to operate after elements are de-energized to purge residual heat and axial flow fan blade with 1570 RPM max.
| 20 KW, 68260 BTU Downflow Unit Heater TPI U3H2620CA4 Specifications |
|---|
| Power | 20 KW |
|---|
| BTU'S | 68260 |
|---|
| Voltage | 600 |
|---|
| Phase | 3 |
|---|
| Amperage | 19.3 |
|---|
| Control Voltage | 240 |
|---|
| Temperature Rise | 52 F |
|---|
| CFM | 1200 |
|---|
| Weight | 75 Lbs. |
|---|
20 KW, 68260 BTU Downflow Unit Heater TPI U3H2620CA4 Features:
CONSTRUCTION:
- 16 ga. steel cabinet with epoxy powder coated finish and control compartment with a hinged and latched access door
- OSHA guards standard with all models
HEATING ELEMENT:
- Corrosion resistant element with steel sheath and steel spiral fins
OVERHEAT PROTECTION:
- All units come equipped with manual reset limit controls to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR:
- Totally enclosed, 1 speed, 1 phase permanently lubricated, thermally protected motors with unit bearings
- Axial flow fan blade - 1570 RPM max.
- Equipped with Fan Purge which allows Fan to operate after elements are de-energized to purge residual heat
TEMPERATURE CONTROLS:
- Unit has In-Built 240v control
DISCONNECT SWITCH:
- It is equipped with In-Built Disconnect
INSTALLATION:
- Unit can be mounted using optional mounting bracket or field constructed angle iron bracket
- Not recommended for mounting with threaded rod or chain