Down Flow Unit HeatersTPI 30 KW, 240V Downflow Unit Heater - H3H2630CA1

30 KW Downflow Unit Heater, TPI H3H2630CA1, is equipped with 102390 BTU, 16 ga. steel cabinet with epoxy powder coated finish, control compartment with a hinged and latched access door, manual reset limit controls to de-energize the heater should an over-temperature situation occur, fan purge which allows fan to operate after elements are de-energized to purge residual heat and totally enclosed, 2 speed, 1 phase permanently lubricated, thermally protected motors with sleeve.

Downflow Unit Heater - TPI H3H2630CA1 Features:

CONSTRUCTION:

• 16 ga. steel cabinet with epoxy powder coated finish and control compartment with a hinged and latched access door
• OSHA guards standard with all models

HEATING ELEMENT:

• Corrosion resistant element with steel sheath and steel spiral fins

OVERHEAT PROTECTION:

• All units come equipped with manual reset limit controls to de-energize the heater should an over-temperature situation occur.

FAN and MOTOR:

• Totally enclosed, 2 speed, 1 phase permanently lubricated, thermally protected motors with sleeve bearings.
• Axial flow fan blade - 1570 RPM max.
• All Models equipped with Fan Purge which allows Fan to operate after elements are de-energized to purge residual heat

TEMPERATURE CONTROLS:

• In-Built 24 volt transformer for low voltage remote thermostat application
• Unit has operate as 2 stage heaters if 2 stage remote thermostat is used

DISCONNECT SWITCH:

• Unit is equipped with In-Built Disconnect except

INSTALLATION:

• Unit can be mounted using optional mounting bracket or field constructed angle iron bracket
• Not recommended for mounting with threaded rod or chain

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

TPI Downflow Unit Heater H3H2630CA1 Resources: