Presenting 50 KW Downflow Unit Heater with 170650 BTU by TPI. Model U3U2650CA1 can be mounted using optional mounting bracket or field constructed angle iron bracket but not recommended for mounting with threaded rod or chain. This OSHA certified unit has various unique features like 16 ga. steel cabinet with epoxy powder coated finish, control compartment with a hinged and latched access door, manual reset limit controls, etc.
| 50 KW, 170650 BTU Downflow Unit Heater TPI U3U2650CA1 Specifications |
|---|
| Power | 50 KW |
|---|
| BTU'S | 170650 |
|---|
| Voltage | 600 |
|---|
| Phase | 3 |
|---|
| Amperage | 48.2 |
|---|
| Control Voltage | 24 |
|---|
| Temperature Rise | 48 F |
|---|
| CFM | 3300 |
|---|
| Weight | 175 Lbs. |
|---|
50 KW, 170650 BTU Downflow Unit Heater TPI U3U2650CA1 Features:
CONSTRUCTION:
- 16 ga. steel cabinet with epoxy powder coated finish and control compartment with a hinged and latched access door
- OSHA guards standard with all models
HEATING ELEMENT:
- Corrosion resistant element with steel sheath and steel spiral fins
OVERHEAT PROTECTION:
- All units come equipped with manual reset limit controls to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR:
- Totally enclosed, 1 speed, 1 phase permanently lubricated, thermally protected motors with unit bearings
- Axial flow fan blade - 1570 RPM max.
- Equipped with Fan Purge which allows Fan to operate after elements are de-energized to purge residual heat
TEMPERATURE CONTROLS:
- Unit has In-Built 240v control
DISCONNECT SWITCH:
- It is equipped with In-Built Disconnect
INSTALLATION:
- Unit can be mounted using optional mounting bracket or field constructed angle iron bracket
- Not recommended for mounting with threaded rod or chain