Suspended or Hand Carry Electric Heater - Fostoria CH-2212-1C - 6826 BTU / 2000 W / 120 V
Electric Infrared Heaters - Suspended or Hand Carry Infrared Heater - Fostoria CH-2212-1C - 6826 BTU
This TPI Suspended Quartz Infrared Heater CH-2212-1C has 60 degrees symmetrical heating pattern. It comes with two 1000 watt elements that can be switched on / off by toggle switches to produce 1000 watts or 2000 watts of heat. It features a GOLD anodized aluminum reflector with end caps, quartz tube, built in wire guards, 15 feet long cord and NEMA 5-20 molded plug. It is recommended to mount this unit at minimum 24 inch height from vertical surface and 6 feet away from combustible substances. This TPI Suspended Heater is ideal for protected interior or outdoor use only!
| TPI Suspended Quartz Infrared Heater CH-2212-1C - Specifications |
|---|
| Model | CH-2212-1C |
|---|
| Watt | 1000W / 2000W |
|---|
| BTU | 3413 / 6826 |
|---|
| Volts | 120V |
|---|
| Phase | 1 |
|---|
| Amps | 8.35 / 16.7 |
|---|
| Reflector Pattern | 60 degree |
|---|
| Weight | 16 lbs |
|---|
| UPC | 686334884099 |
|---|
| Agency Compliance | UL Listed |
|---|
| Included | Quartz tubes (671-5056) and built in wire guards |
|---|
| Note: Mounting Height recommended at 7' to 10' from the ground. |
TPI Suspended Quartz Infrared Heater CH-2212-1C Features:
- 60 degree symmetrical heat pattern
- Quartz tubes and built in wire guards included
- Interior or protected outdoor use only
- GOLD anodized aluminum reflector and end caps
- UL Listed for Overhead Operation
- Mounting Clearances:
- Minimum 24" from vertical surface or 6' from combustibles
- Minimum 24" from ceiling
- Mount at least 36" apart
Cart:
