Forced Air Heaters - 46" Electric Fan Forced Cabinet Unit Heater - 20,478-34,130 Btu - TPI 6346D102033B30D0F
Chase the chill with TPI 46" Electric Fan Forced Cabinet Unit Heater model 6346D102033B30D0F available in our store at affordable prices.. It has 2-heat units with 6KW and 20,478 Btu as low heat output and 10 Kw & 34,130 as high heat output. This heater has two speed (1550 / 1400 rpm), shaded pole, resilient mounted, permanently lubricated fan motors. The fan is easily removable with fan delay switch. It includes 24v transformer and relay, Disconnect switch, Replaceable dust filter. The heater is convertible from 3-phase to 1-phase. So hurry !
| TPI 46" Electric Fan Forced Cabinet Unit Heater 6346D102033B30D0F Specifications |
|---|
| Heater length | 46" |
|---|
| High KW | 10 |
|---|
| High BTU's | 34130 |
|---|
| High AMPS | 50.0 / 35.1 |
|---|
| High CFM | 500 |
|---|
| Low KW | 6 |
|---|
| Low BTU's | 20478 |
|---|
| Low AMPS | 30.8 / 18.4 |
|---|
| Low CFM | 460 |
|---|
| VOLTS | 208 |
|---|
| PHASE | 1-3* |
|---|
| Weight | 130 Lbs. |
|---|
| UPC | 686334667180 |
|---|
| Note | * - Factory Wired for 3-Phase
Field Convertible to Single Phase |
|---|
TPI 46" Electric Fan Forced Cabinet Unit Heater 6346D102033B30D0F Features:
- 2-heat units with high heat outputs from 3-10 KW (10,230 - 34,100 BTU's)
- Some units field convertible from 3-phase to 1-phase
- In-Built thermostat - 50-90 F range that can be bypassed to use remote wall thermostat
- 24v transformer and relay
- Disconnect switch
- Replaceable dust filter
- Two speed (1550 / 1400 rpm), shaded pole, resilient mounted, permanently lubricated fan motors; 480v motors are single speed only
- Heat output and fan speeds controlled independently
- Beige powder coated finish on 18 ga. steel housing - 9.5" Deep x 25" High
- Steel sheath finned tubular elements.
- Easily removable fan and element decks for simplified maintenance
- Full length capillary automatic reset thermal protection with secondary manual reset
- All models include fan delay switch