Forced Air Heaters - 46" Electric Fan Forced Cabinet Unit Heater - 20,478-34,130 Btu - TPI 6346D102433B30D0F
Presenting TPI 46" Electric Fan Forced Cabinet Unit Heater with 2-heat units with 6KW and 20,478 Btu as low heat output and 10 Kw & 34,130 as high heat output. Model 6346D102433B30D0F includes 24v transformer and relay, Disconnect switch, Replaceable dust filter. This heater has two speed (1550 / 1400 rpm), shaded pole, resilient mounted, permanently lubricated fan motors. The fan is easily removable with fan delay switch. Get it now !
| TPI 46" Electric Fan Forced Cabinet Unit Heater 6346D102433B30D0F Specifications |
|---|
| Heater length | 46" |
|---|
| High KW | 10 |
|---|
| High BTU's | 34130 |
|---|
| High AMPS | 43.6 / 30.7 |
|---|
| High CFM | 500 |
|---|
| Low KW | 6 |
|---|
| Low BTU's | 20478 |
|---|
| Low AMPS | 26.9 / 16.2 |
|---|
| Low CFM | 460 |
|---|
| VOLTS | 240 |
|---|
| PHASE | 1-3* |
|---|
| Weight | 130 Lbs. |
|---|
| UPC | 686334667197 |
|---|
| Note | * - Factory Wired for 3-Phase
Field Convertible to Single Phase |
|---|
TPI 46" Electric Fan Forced Cabinet Unit Heater 6346D102433B30D0F Features:
- 2-heat units with high heat outputs from 3-10 KW (10,230 - 34,100 BTU's)
- Some units field convertible from 3-phase to 1-phase
- In-Built thermostat - 50-90 F range that can be bypassed to use remote wall thermostat
- 24v transformer and relay
- Disconnect switch
- Replaceable dust filter
- Two speed (1550 / 1400 rpm), shaded pole, resilient mounted, permanently lubricated fan motors; 480v motors are single speed only
- Heat output and fan speeds controlled independently
- Beige powder coated finish on 18 ga. steel housing - 9.5" Deep x 25" High
- Steel sheath finned tubular elements.
- Easily removable fan and element decks for simplified maintenance
- Full length capillary automatic reset thermal protection with secondary manual reset
- All models include fan delay switch