Get Heater Quote
Search:
Home > Heaters > Commercial Heaters > Electric Fan Forced Heaters >
Electric Fan Forced Suspended Unit Heater TPI P3P5105CA1N 17.1 BTU's
Electric Fan Forced Suspended Unit Heater TPI P3P5105CA1N 17.1 BTU's
Electric Fan Forced Suspended Unit Heater TPI P3P5105CA1N 17.1 BTU's
Electric Fan Forced Suspended Unit Heater TPI P3P5105CA1N 17.1 BTU's
Electric Fan Forced Suspended Unit Heater TPI P3P5105CA1N 17.1 BTU's

Electric Fan Forced Suspended Unit Heater TPI P3P5105CA1N - 17.1 BTU's

Brand: TPI
SKU: P3P5105CA1N
Mfg Number:
  • BTU /hr.: 17.1 BTU's
  • Fuel Type: Electric
  • Volts: 480 V
  • Dimensions: 17-3/4"H x 14-15/32"W x 6-1/2"D
Availability: In Stock Usually ships In 7-10 Business Days

Product Information
Retail: $958.00 Price: $526.90
 
You Save: $431.10 (45.0%)
With Factory Installed Controls, This Product is Custom Built and Non-Returnable
Quantity:
Control:
Update price
Description

5KW 480V 3P 5100 Series Unit Heater from TPI offers a new exciting room heating alternative. This unit is ideal for applications up to 6000 feet. Model P3P5105CA1N is equipped with automatic reset type limit that offers an amazing output of 17.1 BTU/H. Louvers are individually adjustable for directional control of air flow up to 15 degree from straight horizontal. It completes with its 18 ga. steel cabinet with powder coated finish, that makes it long lasting unit.

TPI Fan Forced Suspended Unit Heater - P3P5105CA1N Specifications
Wattage5 KW
BTU's17.1 BTU/H
VOLTS480V
Phase3 Ph
AMPS6.1
Control Voltage24
Temp Rise deg F40 F
Air Throw12'
CFM400
Recom'd Mounting Ht.Hor- 9', Ver- 9'
Dimension17-3/4"H x 14-15/32"W x 6-1/2"D
Weight27 lbs.
UPC686334645188
ListedETL Listed

Fan Forced Suspended Unit Heater - P3P5105CA1N Features:

    CONSTRUCTION:
  • Heavy 18 ga. welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
  • HEATING ELEMENT:
  • Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow.
  • OVERHEAT PROTECTION:
  • Comes equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur.
  • FAN and MOTOR:
  • Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motor with unit bearing. Motor is mounted with rubber insulators to minimize vibration & noise. Fan over-ride purges unit of residual heat at shutdown
  • LOUVER ASSEMBLY:
  • Louver is individually adjustable for directional control of air flow up to 15 deg from straight horizontal. Optional diffusers available for down flow (vertical discharge) applications
  • TEMPERATURE CONTROLS:
  • Optional low voltage and line voltage thermostats available with an adjustable temperature range of 40 deg-90 degF
  • INSTALLATION:
  • It can be mounted for horizontal or vertical discharge
  • For applications up to 6000 feet.
  • ABS type approved
  • FIELD INSTALLED OPTIONS:
  • In-unit or wall mounted temperature control thermostats - low or line voltage
  • Summer fan switch to operate the fan only.
  • Power disconnect switch
  • Heat stratification thermostat
Specifications

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

Product PDF's and Other Resources

TPI Fan Forced Suspended Unit Heater P3P5105CA1N Resources:

TPI Fan Forced Suspended Unit Heater P3P5105CA1N Specifications
Dimensions
17-3/4"H x 14-15/32"W x 6-1/2"D
Service Disabled Veteran Owned Small Business - pending | Minority Business Enterprise