Get Heater Quote
Search:
Home > Heaters > Commercial Heaters > Electric Fan Forced Heaters >
Electric Fan Forced Suspended Unit Heater TPI P3P5130CA1N 102.4 btu's
Electric Fan Forced Suspended Unit Heater TPI P3P5130CA1N 102.4 btu's
Electric Fan Forced Suspended Unit Heater TPI P3P5130CA1N 102.4 btu's
Electric Fan Forced Suspended Unit Heater TPI P3P5130CA1N 102.4 btu's
Electric Fan Forced Suspended Unit Heater TPI P3P5130CA1N 102.4 btu's

Electric Fan Forced Suspended Unit Heater TPI P3P5130CA1N - 102.4 btu's

Brand: TPI
SKU: P3P5130CA1N
Mfg Number:
  • BTU /hr.: 102.4 btu's
  • Fuel Type: Electric
  • Volts: 480 V
  • Dimensions: 34"H x 29-1/4"W x 10-1/16"D
Availability: In Stock Usually ships In 7-10 Business Days

Product Information
Retail: $3,709.00 Price: $2,039.95
 
You Save: $1,669.05 (45.0%)
With Factory Installed Controls, This Product is Custom Built and Non-Returnable
Quantity:
Control:
Update price
Description

Our giant TPI brand 30KW Fan Forced Suspended Unit Heater is a true science marvel. A stylish and durable product with a spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow. This commercially approved heater has a voltage rating between 480 volts and an output of 102.4 BTU/H. The model P3P5130CA1N also contains heat stratification thermostat.

TPI Fan Forced Suspended Unit Heater - P3P5130CA1N Specifications
Wattage30 KW
BTU's102.4 BTU/H
VOLTS480V
Phase3 Ph
AMPS36.2
Control Voltage24
Temp Rise deg F47/53 F
Air Throw40'
CFM2000/1800
Recom'd Mounting Ht.Hor- 12', Ver- 22'
Dimension34"H x 29-1/4"W x 10-1/16"D
Weight120 lbs.
UPC686334645461
ListedETL Listed

Fan Forced Suspended Unit Heater - P3P5130CA1N Features:

CONSTRUCTION:

  • 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance

HEATING ELEMENT:

  • Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow

OVERHEAT PROTECTION:

  • 3.3 - 50 KW units come equipped with automatic reset type limit

FAN and MOTOR:

  • Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 KW - 20 KW models

LOUVER ASSEMBLY:

  • Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
  • Optional diffusers available for down flow (vertical discharge) applications

TEMPERATURE CONTROLS:

  • Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50 deg -90 deg F
  • Units with model numbers ending in CA1 are factory wired for low voltage controls

INSTALLATION:

  • Unit Heaters can be mounted for horizontal or vertical discharge
  • 5100 series suggested for applications up to 6000 feet; for applications up to or above 6000 feet see UH series.

FIELD INSTALLED OPTIONS:

  • In-Built or wall mounted temperature control thermostats - low or line voltage
  • Summer fan switch to operate the fan only.
  • Power disconnect switch
  • 60-100KW units can be multiple stage when used with optional SC5100 and C1025 stat
  • Heat stratification thermostat
Specifications

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

Product PDF's and Other Resources

TPI Fan Forced Suspended Unit Heater P3P5130CA1N Resources:

TPI Fan Forced Suspended Unit Heater P3P5130CA1N Specifications
Dimensions
34"H x 29-1/4"W x 10-1/16"D
RELATED PRODUCTS
Electric Explosion Proof Heater Qmark GUX20004832 68240 btu

Price: $6,770.00

Service Disabled Veteran Owned Small Business - pending | Minority Business Enterprise