SKU: P3P5150CA1N
Mfg Number:
- BTU /hr.: 170.6 btu's
- Fuel Type: Electric
- Volts: 480 V
- Dimensions: 34"H x 29-1/4"W x 10-1/16"D
Availability: In Stock Usually ships In 7-10 Business Days
Product Information
Retail: $5,920.00
Price: $3,256.00
You Save: $2,664.00 (45.0%)
Control:
Update price
50KW 480V 3P 5100 Series Unit Heater produces an amazing output of 170.6 BTU/hr. This TPI model P3P5150CA1N has heat stratification thermostat. It is constructed using 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance. This unit completes with its Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal.
| TPI Fan Forced Suspended Unit Heater - P3P5150CA1N Specifications |
|---|
| Wattage | 50 KW |
|---|
| BTU's | 170.6 BTU |
|---|
| VOLTS | 480V |
|---|
| Phase | 3 Ph |
|---|
| AMPS | 60.3 |
|---|
| Control Voltage | 24 |
|---|
| Temp Rise deg F | 51/56 F |
|---|
| Air Throw | 50' |
|---|
| CFM | 3100/2800 |
|---|
| Recom'd Mounting Ht. | Hor- 15', Ver- 22' |
|---|
| Dimension | 34"H x 29-1/4"W x 10-1/16"D |
|---|
| Weight | 120 lbs. |
|---|
| UPC | 686334645522 |
|---|
| Listed | ETL Listed |
|---|
Fan Forced Suspended Unit Heater - P3P5150CA1N Features:
CONSTRUCTION:
- 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
HEATING ELEMENT:
- Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow
OVERHEAT PROTECTION:
- 3.3 - 50 KW units come equipped with automatic reset type limit
FAN and MOTOR:
- Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 KW - 20 KW models
LOUVER ASSEMBLY:
- Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
- Optional diffusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS:
- Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50 deg -90 deg F
- Units with model numbers ending in CA1 are factory wired for low voltage controls
INSTALLATION:
- Unit Heaters can be mounted for horizontal or vertical discharge
- 5100 series suggested for applications up to 6000 feet; for applications up to or above 6000 feet see UH series.
FIELD INSTALLED OPTIONS:
- In-Built or wall mounted temperature control thermostats - low or line voltage
- Summer fan switch to operate the fan only.
- Power disconnect switch
- 60-100KW units can be multiple stage when used with optional SC5100 and C1025 stat
- Heat stratification thermostat
Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.
34"H x 29-1/4"W x 10-1/16"D