We bring you 60KW 480V 3P 5100 Series Fan Forced Suspended Unit Heater by TPI. Model P3P5160CA1 consists of 60 kilo watts of power, 204.7 BTU/H, powder coated 18 gauge steel front, automatic reset thermal limit. This amazing unit is a perfect combination of highest quality, exceptional performance and value.
| TPI Fan Forced Suspended Unit Heater - P3P5160CA1 Specifications |
|---|
| Wattage | 60 KW |
|---|
| BTU's | 204.7 BTU/H |
|---|
| VOLTS | 480V |
|---|
| Phase | 3 Ph |
|---|
| AMPS | 72.3 |
|---|
| Control Voltage | 24 |
|---|
| Temp Rise deg F | 60 F |
|---|
| Air Throw | 50' |
|---|
| CFM | 3400 |
|---|
| Recom'd Mounting Ht. | Hor- 18', Ver- 31' |
|---|
| Dimension | 35-1/2"H x 30-1/2"W x 14-1/2"D |
|---|
| Weight | 141 lbs. |
|---|
| UPC | 686334721363 |
|---|
| Listed | ETL Listed |
|---|
Fan Forced Suspended Unit Heater - P3P5160CA1 Features:
CONSTRUCTION:
- 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
HEATING ELEMENT:
- Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow
OVERHEAT PROTECTION:
- 3.3 - 50 KW units come equipped with automatic reset type limit
FAN and MOTOR:
- Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 KW - 20 KW models
LOUVER ASSEMBLY:
- Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
- Optional diffusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS:
- Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50 deg -90 deg F
- Units with model numbers ending in CA1 are factory wired for low voltage controls
INSTALLATION:
- Unit Heaters can be mounted for horizontal or vertical discharge
- 5100 series suggested for applications up to 6000 feet; for applications up to or above 6000 feet see UH series.
FIELD INSTALLED OPTIONS:
- In-Built or wall mounted temperature control thermostats - low or line voltage
- Summer fan switch to operate the fan only.
- Power disconnect switch
- 60-100KW units can be multiple stage when used with optional SC5100 and C1025 stat
- Heat stratification thermostat