Get Heater Quote
Search:
Home > Heaters > Commercial Heaters > Electric Fan Forced Heaters >
Electric Fan Forced Suspended Unit Heater TPI F1F5103N 11200 BTU's
Electric Fan Forced Suspended Unit Heater TPI F1F5103N 11200 BTU's
Electric Fan Forced Suspended Unit Heater TPI F1F5103N 11200 BTU's
Electric Fan Forced Suspended Unit Heater TPI F1F5103N 11200 BTU's
Electric Fan Forced Suspended Unit Heater TPI F1F5103N 11200 BTU's

Electric Fan Forced Suspended Unit Heater TPI F1F5103N - 11200 BTU's

Brand: TPI
SKU: F1F5103N
Mfg Number:
  • BTU /hr.: 11200 BTU's
  • Fuel Type: Electric
  • Volts: 208V
  • Dimensions: 17-3/4 x 14-15/32 x 6-1/2
Availability: In Stock Usually ships In 7-10 Business Days

Product Information
Retail: $693.00 Price: $381.15
 
You Save: $311.85 (45.0%)
With Factory Installed Controls, This Product is Custom Built and Non-Returnable
Quantity:
Control:
Update price
Description

Presenting 3.3KW Single Pole Fan Forced Suspended Unit Heater manufactured by TPI. Model no F1F5103N is manufactured using 18 gauge steel cabinet and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance. Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow.

TPI 3.3KW Single Pole Fan Forced Suspended Unit Heater F1F5103N Specifications
Power3.3 KW
BTU's11.2
Volts208
Phase1
Amps15.9
Control Volts208
Temp Rise26 F
CFM400
Air Throw12'
Recommended Mounting Ht.(Horizontal)9'
Recommended Mounting Ht.(Vertical)9'
Weight25 Lbs.
UPC686334645089

TPI 3.3KW Single Pole Fan Forced Suspended Unit Heater F1F5103N Features:

    CONSTRUCTION:
  • Heavy 18 ga. welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
  • HEATING ELEMENT:
  • Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow.
  • OVERHEAT PROTECTION:
  • Comes equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur.
  • FAN and MOTOR:
  • Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motor with unit bearing. Motor is mounted with rubber insulators to minimize vibration & noise. Fan over-ride purges unit of residual heat at shutdown
  • LOUVER ASSEMBLY:
  • Louver is individually adjustable for directional control of air flow up to 15 deg from straight horizontal. Optional diffusers available for down flow (vertical discharge) applications
  • TEMPERATURE CONTROLS:
  • Optional low voltage and line voltage thermostats available with an adjustable temperature range of 40 deg-90 degF
  • INSTALLATION:
  • It can be mounted for horizontal or vertical discharge
  • For applications up to 6000 feet.
  • ABS type approved
  • FIELD INSTALLED OPTIONS:
  • In-unit or wall mounted temperature control thermostats - low or line voltage
  • Summer fan switch to operate the fan only.
  • Power disconnect switch
  • Heat stratification thermostat
Specifications

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

Product PDF's and Other Resources

TPI 3.3KW Single Pole Fan Forced Suspended Unit Heater F1F5103N Resources:

TPI 3.3KW Single Pole Fan Forced Suspended Unit Heater F1F5103N Specifications
Dimensions
17-3/4 x 14-15/32 x 6-1/2
Service Disabled Veteran Owned Small Business - pending | Minority Business Enterprise