Get Heater Quote
Search:
Home > Heaters > Commercial Heaters > Electric Wall Heaters >
Electric Fan Forced Unit Heater TPI F3FUH03C03 11200
Electric Fan Forced Unit Heater TPI F3FUH03C03 11200

Electric Fan Forced Unit Heater TPI F3FUH03C03 - 11200

Brand: TPI
SKU: F3FUH03C03
Mfg Number:
  • BTU /hr.: 11200
  • Fuel Type: Electric
  • Volts: 208 V
  • Dimensions: 13"H x 20"W x 11"D
Availability: In Stock Usually ships In 7-10 Business Days

Product Information
Retail: $693.00 Price: $381.15
 
You Save: $311.85 (45.0%)
Quantity:
Factory Installed Options:






Update price
Description

Fan Forced Wall Heaters - 3.3 KW Fan Forced Horizontal Discharge Unit Heater - TPI F3FUH03C03 - 11200 BTU

3.3 KW Fan Forced Horizontal Discharge Unit Heater is one of the highest quality unit heaters available in the market. TPI F3FUH03C03 features 11200 BTU, 24 volt transformer to convert from line voltage to low voltage remote thermostat operation, summer fan switch to operate the fan only, powder coated epoxy finish and fan assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard.

TPI 3.3 KW Fan Forced Horizontal Discharge Unit Heater F3FUH03C03 Specifications
UPC686334711494
KW3.3
BTU11200
VOLTS208
PHASE3
AMPS9.2
Control Voltage208
Temperature Rise26 F
Air Throw26'
CFM400
Recommended Mounting Height9'
Weight36 Lbs.

TPI 3.3 KW Fan Forced Horizontal Discharge Unit Heater F3FUH03C03 Features:

CONSTRUCTION:

  • 18 ga. steel cabinet with powder coated finish and control compartment with a hinged and latched access door simplifying wiring, installation & maintenance.

HEATING ELEMENT:

  • Circular copper clad steel element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade.

OVERHEAT PROTECTION:

  • Equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur.

FAN and MOTOR:

  • Totally enclosed, single phase, permanently lubricated and thermally protected motors.
  • Fan assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard.

LOUVER ASSEMBLY:

  • Louvers are individually adjustable for directional control of air flow and the louver assembly can be repositioned in the field from down air flow to right or left directional air flow.

INSTALLATION:

  • Can be mounted at a maximum of 45 degrees off of horizontal
  • 1/4" threaded rod may be used for mounting
  • Optional wall / ceiling mounting brackets
  • Suitable for applications up to 13,000 feet

FACTORY INSTALLED OPTIONS:

  • 24 volt transformer to convert from line voltage to low voltage remote thermostat operation.
  • Summer fan switch to operate the fan only.
  • Fan Delay Switch to purge all residual heat from the unit after the heating element has cycled off
  • Powder coated Epoxy finish
  • Disconnect switch
Specifications

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

Product PDF's and Other Resources

TPI 3.3 KW Fan Forced Horizontal Discharge Unit Heater F3FUH03C03 Resources:

TPI 3.3 KW Fan Forced Horizontal Discharge Unit Heater F3FUH03C03 Specification
Dimensions
13"H x 20"W x 11"D
Service Disabled Veteran Owned Small Business - pending | Minority Business Enterprise