SKU: F3F5115CA1L
Mfg Number:
- BTU /hr.: 51.2
- Fuel Type: Electric
- Volts: 208 V
- Dimensions: 28-11/16"H x 21-1/2"W x 6-1/2"D
Availability: In Stock Usually ships In 7-10 Business Days
Product Information
Retail: $1,980.00
Price: $1,089.00
You Save: $891.00 (45.0%)
Control:
Update price
Fan Forced Wall Heaters - 15 KW 5100 Series Suspended Fan Forced Unit Heater - TPI F3F5115CA1L - 51.2 BTU
We have 5100 Series Suspended Fan Forced Unit Heater with 51.2 BTU and 15 KW of power. TPI F3F5115CA1L features 18 ga. steel cabinet with powder coated finish, control compartment housing a master terminal board with a hinged and latched access door; simplifying wiring, installation and maintenance. The spiral fin steel element with continuously brazed steel fins is formed to allow side draw through air flow. Louvers are individually adjustable for directional control of air flow up to 15 degree from straight horizontal.
| TPI 15 KW Suspended Fan Forced Unit Heater F3F5115CA1L Specifications |
|---|
| UPC | 686334645324 |
|---|
| KW | 15 |
|---|
| BTU / H | 51.2 |
|---|
| VOLTS | 208 |
|---|
| PHASE | 3 |
|---|
| AMPS | 41.7 |
|---|
| Control Voltage | 24 |
|---|
| Temperature Rise | 43 F |
|---|
| Air Throw | 32' |
|---|
| CFM | 1100 |
|---|
| Recommended Mounting Height (Horizontal) | 11' |
|---|
| Recommended Mounting Height (Vertical) | 20' |
|---|
| Weight | 64 Lbs. |
|---|
TPI 15 KW Suspended Fan Forced Unit Heater F3F5115CA1L Features:
CONSTRUCTION:
- 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation and maintenance.
HEATING ELEMENT:
- Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow
OVERHEAT PROTECTION:
- Equipped with automatic reset type limit.
FAN and MOTOR:
- Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors.
- Fan over-ride purges unit of residual heat at shutdown
LOUVER ASSEMBLY:
- Louvers are individually adjustable for directional control of air flow up to 15 degree from straight horizontal
- Optional diffusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS:
- Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50 degree -90 degree F
INSTALLATION:
- Unit Heaters can be mounted for horizontal or vertical discharge
- Suggested for applications up to 6000 feet.
FIELD INSTALLED OPTIONS:
- In-Built or wall mounted temperature control thermostats - low or line voltage
- Summer fan switch to operate the fan only.
- Power disconnect switch
- Heat stratification thermostat
Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.
28-11/16"H x 21-1/2"W x 6-1/2"D