The CGH562 240 volt heavy duty portable unit heater is designed with rugged, durable construction. It provides warmth for large areas that are often difficult to heat, like garages and workshops. Continuous fan operation allows fan to operate without heating, to provide comfortable air circulation. The CGH562 comes factory equipped with a bracket for either wall mount or floor stand use (non-marking rubber pads are included on the mounting bracket). The area must be equipped with an accessible 240 volt receptacle.
Portable fan unit heater shall be UL Listed and rated at 240V. External cabinet shall be constructed of 20 gauge high quality steel and shall be finished with a baked on powder coat paint. Fan shall be aluminum blade axial flow type, and mounted directly to the motor shaft. Motor shall be shaded pole with ball bearings. Heating elements shall be sealed in magnesium oxide powder and protected by metal sheathing and aluminum fins. Heater shall be equipped with manual reset thermal cut out for over temperature protection. Fan motor circuits shall be thermostatically controlled with fan delay.
The CGH562 includes a fan switch for air circulation without heat. All units include a built-in single pole thermostat. UL requires a 3' minimum clearance from front. For optimum performance Cadet recommends 6" from back and top, and 12" from sides.
Standard color for the CGH562 heater is Almond. Recommended for elevations under 7500 feet.
Cadet Garage / Utility Unit Heater CGH562 Features:
- Thermal Safeguard -
High temperature auto reset: turns off heater if normal operating temperatures are exceeded
- Open airflow design reduces debris build up
- Finned steel tubular heating element
- Built-in single pole thermostat with no heat position
- Fan only control for air circulation
- Portable, great for garages and workshops
- 6 foot cord with polarized plug for 240V use. Requires a 30 Receptacle for use.
- Bracket for floor, wall, or ceiling mount provides multiple mounting options
- 1 year warranty
- UL listed
|Cadet Garage / Utility Unit Heater CGH562 Specifications|
|BTUs||19107 / 14322 BTU|
|Carton Dimensions||15" W x 16.75" H x 14.25" D|
|Product Dimensions||13.75" W x 16" H x 11.25" D |
|Rough In Dimensions||14.25" W x 19.25" H x 4" D|
|Voltage||240 V / 208 V|
|Watts ||5600 W (240V) / 4200 W (208V)|
|Amps||23.4 A (240V) / 20.2 A (208V)|
|Plug Type||30 Amp|
|Includes||Thermostat, 6 foot cord, and mounting bracket|