Electric Sauna Heaters - 240V Heater with Built In Timer - Harvia KIP-80-B1
Harvia KIP-80-B1 is an Electric Sauna Heater with a built-in timer that works on 240V. This unit is equipped with timer and thermostat that is found on lower part of the heater. KIP-80-B1 heater is with a separate control unit that can be installed in a dry area outside the sauna room. The timer and thermostat, which is placed in front of the heater, can be moved to the left or right side of the heater. KIP-80-B1 model is connected to the electrical network only, which is then directed to the junction box on the sauna wall. Make sure the connection cable to be made up of rubber cable or its equivalent.
| Harvia Electric Sauna Heater KIP-80-B1 - Specifications |
| MIN-MAX CU. FT. SAUNA ROOM | 130 |
|---|
| WATTS | 8000 |
|---|
| AMPS | 33.3 |
|---|
| VOLTAGE | 240 |
|---|
| PHASE | 1 |
|---|
| WIRE SIZE 90°C COPPER | 8 |
|---|
| CONTROL MODEL NO. | Built-In |
|---|
| CONTACTOR MODEL NO. | None |
|---|
Harvia Electric Sauna Heater KIP-80-B1 Features:
- Thermostat and timer are located on right or left side of the heater, as the requirement
- Uses 240V
- Outer casing temperature is left unaffected
- Equipped with timer
- Wall Mounted unit
- Large stone space
- Desired sauna temperature is set by turning the knob
- Built-in control panel
- Thermostat on lower part of heater
- Thermostat and timer can be relocated