Electric Convection Heaters - 34" Single Phase Hazardous Location Wall Convector - TPI FEP08241RA - 2730 BTU
The 34" Single Phase Hazardous Location Wall Convector is the perfect choice for safe, convenient heat on the job site. One of the most versatile heaters on the market! The model FEP08241RA , comes with 2730 Btu with 800 watts, 240 volts, 3.3 amps and provides the climate control you need without wasting time refueling. This heater has heavy duty 16 ga. steel with gray epoxy textured powder coated finish. The stainless steel cartridge element inserted into aluminum finned copper sheath. It is NEMA 4 rated.
| Hazardous Location Wall Convector TPI FEP08241RA Specifications |
|---|
| UPC | 686334445351 |
|---|
| Watts | 800 |
|---|
| Btu's | 2730 |
|---|
| Volts | 240 |
|---|
| Amps | 3.3 |
|---|
| Cabinet Length | 34" |
|---|
| Weight | 50 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP08241RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats