Electric Convection Heaters - 1800W Single Phase Hazardous Location Wall Convector - TPI FEP18201RA - 6143 BTU
We bring you Electric Convection Heaters made by TPI. Model FEP18201RA is an excellent 6143 BTU output. This Single Phase Hazardous Location Wall Convector requires 208 volts and 1800 wattage. It comes with heavy duty 16 ga. steel with gray epoxy textured powder coated finish. Available with cabinet measuring 18" high and 9" wide.
| Hazardous Location Wall Convector TPI FEP18201RA Specifications |
|---|
| UPC | 686334445153 |
|---|
| Watts | 1800 |
|---|
| Btu's | 6143 |
|---|
| Volts | 208 |
|---|
| Amps | 8.7 |
|---|
| Cabinet Length | 34" |
|---|
| Weight | 50 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP18201RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats