Electric Convection Heaters - 1800W Single Phase Hazardous Location Wall Convector - TPI FEP18241RA - 6143 BTU
Buy safe and easy to handle heaters made by TPI. Model FEP18241RA is Single Phase Hazardous Location Wall Convector . It provides 6143 BTU output. This electric convection heater requires 1800 wattage and 240 volts. It is available with heavy duty 16 ga. steel with gray epoxy textured powder coated finish. The cabinet size is 18" high, 9" wide. This standard unit (without EPET thermostat or control section) is NEMA 4 rated.
| Hazardous Location Wall Convector TPI FEP18241RA Specifications |
|---|
| UPC | 686334445160 |
|---|
| Watts | 1800 |
|---|
| Btu's | 6143 |
|---|
| Volts | 240 |
|---|
| Amps | 7.5 |
|---|
| Cabinet Length | 34" |
|---|
| Weight | 50 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP18241RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats