Electric Convection Heaters - 1800W Single Phase Hazardous Location Wall Convector - TPI FEP18271RA - 6143 BTU
Take highly efficient and cost effective Electric Convection Heaters made by TPI. Model FEP18271RA yields an 6143 BTU output and requires 1800 wattage. This Single Phase Hazardous Location Wall Convector needs 277 voltage. Available with heavy duty 16 ga. steel with gray epoxy textured powder coated finish.
| Hazardous Location Wall Convector TPI FEP18271RA Specifications |
|---|
| UPC | 686334445177 |
|---|
| Watts | 1800 |
|---|
| Btu's | 6143 |
|---|
| Volts | 277 |
|---|
| Amps | 6.5 |
|---|
| Cabinet Length | 34" |
|---|
| Weight | 50 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP18271RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats