Electric Convection Heaters - 34" Single Phase Hazardous Location Wall Convector - TPI FEP16121RA - 5460 BTU
Buy TPI 34" Single Phase Hazardous Location Wall Convector to relief from this winter. Model FEP16121RA is a 5460 Btu unit with 1600 watts, 120 volts and 13.3 amps. It has heavy duty 16 ga. steel with gray epoxy textured powder coated finish. The stainless steel cartridge element inserted into aluminum finned copper sheath. It is NEMA 4 rated.
| Hazardous Location Wall Convector TPI FEP16121RA Specifications |
|---|
| UPC | 686334445382 |
|---|
| Watts | 1600 |
|---|
| Btu's | 5460 |
|---|
| Volts | 120 |
|---|
| Amps | 13.3 |
|---|
| Cabinet Length | 34" |
|---|
| Weight | 54 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP16121RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats