Electric Convection Heaters - 34" Single Phase Hazardous Location Wall Convector - TPI FEP16271RA - 5460 BTU
Chase the chill with TPI FEP16271RA, 34" 3 Phase Hazardous Location Wall Convector. The heater is a perfect blend of highest quality, exceptional service and value. It is a 5460 Btu unit with 1600 watts, 277 volts and 5.8 amps. This unit has heavy duty 16 ga. steel with gray epoxy textured powder coated finish. The stainless steel cartridge element inserted into aluminum finned copper sheath. It is NEMA 4 rated.
| Hazardous Location Wall Convector TPI FEP16271RA Specifications |
|---|
| UPC | 686334445412 |
|---|
| Watts | 1600 |
|---|
| Btu's | 5460 |
|---|
| Volts | 277 |
|---|
| Amps | 5.8 |
|---|
| Cabinet Length | 34" |
|---|
| Weight | 54 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP16271RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats