Electric Convection Heaters - 3600W Single Phase Hazardous Location Wall Convector - TPI FEP36241RA - 12286 BTU
This is perfect choice for convenient and safe heat for your place. Get model FEP36241RA for safe heating requirements. The stainless steel cartridge element inserted into aluminum finned copper sheath. This standard unit (without EPET thermostat or control section) is NEMA 4 rated. This heater requires 3600 wattage and 240 voltage to give 1286 BTU output. The model comes with heavy duty 16 ga. steel with gray epoxy textured powder coated finish.
| Hazardous Location Wall Convector TPI FEP36241RA Specifications |
|---|
| UPC | 686334445207 |
|---|
| Watts | 3600 |
|---|
| Btu's | 12286 |
|---|
| Volts | 240 |
|---|
| Amps | 15 |
|---|
| Cabinet Length | 34" |
|---|
| Weight | 54 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP36241RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats