Electric Convection Heaters - 3600W Single Phase Hazardous Location Wall Convector - TPI FEP36571RA - 12286 BTU
The affordable way to keep things warm with Single Phase Hazardous Location Wall Convector made by TPI. Model FEP36571RA consumes 3600 wattage to give 12286 BTU output. The stainless steel cartridge element inserted into aluminum finned copper sheath. Available with standard unit (without EPET thermostat or control section) is NEMA 4 rated.
| Hazardous Location Wall Convector TPI FEP36571RA Specifications |
|---|
| UPC | 686334445238 |
|---|
| Watts | 3600 |
|---|
| Btu's | 12286 |
|---|
| Volts | 600 |
|---|
| Amps | 6 |
|---|
| Cabinet Length | 34" |
|---|
| Weight | 54 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP36571RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats