Electric Convection Heaters - 58" Single Phase Hazardous Location Wall Convector - TPI FEP17481RA - 5802 BTU
Showing this winter TPI FEP17481RA, 58" Single Phase Hazardous Location Wall Convector. The model is a 5802 Btu unit with 1700 watts, 480 volts and 3.5 amps power consumption. This unit has heavy duty 16 ga. steel with gray epoxy textured powder coated finish. The stainless steel cartridge element inserted into aluminum finned copper sheath. It is NEMA 4 rated.
| Hazardous Location Wall Convector TPI FEP17481RA Specifications |
|---|
| UPC | 686334445481 |
|---|
| Watts | 1700 |
|---|
| Btu's | 5802 |
|---|
| Volts | 480 |
|---|
| Amps | 3.5 |
|---|
| Cabinet Length | 58" |
|---|
| Weight | 80 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP17481RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats