Electric Convection Heaters - 3800W Single Phase Hazardous Location Wall Convector - TPI FEP38201RA - 12969 BTU
Chase the electric convection heaters made by TPI. Model FEP38201RA is Single Phase Hazardous Location Wall Convector . This model consumes 3800 wattage and requires 208 voltage to yield a handsome 12969 BTU output. Available with bottom in front out air flow system. This standard unit (without EPET thermostat or control section) is NEMA 4 rated.
| Hazardous Location Wall Convector TPI FEP38201RA Specifications |
|---|
| UPC | 686334445245 |
|---|
| Watts | 3800 |
|---|
| Btu's | 12969 |
|---|
| Volts | 208 |
|---|
| Amps | 18.3 |
|---|
| Cabinet Length | 58" |
|---|
| Weight | 80 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP38201RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats