Electric Convection Heaters - 3400W Single Phase Hazardous Location Wall Convector - TPI FEP34241RA - 11604 BTU
Chase this electric convection heater made by TPI, yielding an excellent 11604 BTU output. TPI FEP34241RA is Hazardous Location Wall Convector . This efficient heater gives 3400 wattage and 240 volt. It comes with heavy duty 16 ga. steel with gray epoxy textured powder coated finish. The cabinet size is 18" high and 9" wide. The standard unit (without EPET thermostat or control section) is NEMA 4 rated.
| Hazardous Location Wall Convector TPI FEP34241RA Specifications |
|---|
| UPC | 686334445504 |
|---|
| Watts | 3400 |
|---|
| Btu's | 11604 |
|---|
| Volts | 240 |
|---|
| Amps | 14.2 |
|---|
| Cabinet Length | 58" |
|---|
| Weight | 85 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP34241RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats