Electric Convection Heaters - 3400W Single Phase Hazardous Location Wall Convector - TPI FEP34571RA - 11604 BTU
Get the safe and instant heat with this electric convection heater. Model FEP34571RA is Single Phase Hazardous Location Wall Convector made by TPI. This efficient heater requires 3400 wattage and gives an 11604 BTU output. The stainless steel cartridge element are inserted into aluminum finned copper sheath. This standard unit (without EPET thermostat or control section) is NEMA 4 rated.
| Hazardous Location Wall Convector TPI FEP34571RA Specifications |
|---|
| UPC | 686334445535 |
|---|
| Watts | 3400 |
|---|
| Btu's | 11604 |
|---|
| Volts | 600 |
|---|
| Amps | 5.7 |
|---|
| Cabinet Length | 58" |
|---|
| Weight | 85 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP34571RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats