Electric Convection Heaters - 7600W Single Phase Hazardous Location Wall Convector - TPI FEP76201RA - 25938 BTU
Buy safe and easy to handle heater from TPI. Model FEP76201RA is Single Phase Hazardous Location Wall Convector. This efficient unit gives 25938 BTU output by consuming 7600 watts of energy. The stainless steel cartridge element inserted into aluminum finned copper sheath. This standard unit (without EPET thermostat or control section) is NEMA 4 rated and wall mounting bracket supplied with this unit.
| Hazardous Location Wall Convector TPI FEP76201RA Specifications |
|---|
| UPC | 686334445283 |
|---|
| Watts | 7600 |
|---|
| Btu's | 25938 |
|---|
| Volts | 208 |
|---|
| Amps | 36.5 |
|---|
| Cabinet Length | 58" |
|---|
| Weight | 85 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP76201RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats