Electric Convection Heaters - 7600W Single Phase Hazardous Location Wall Convector - TPI FEP76481RA - 25938 BTU
When the weather turns frosty, keep your indoor or outdoor workspace warm and cozy with electric convection heaters made by TPI. Model FEP76481RA is Single Phase Hazardous Location Wall Convector. This electric heater consumes 7600 wattage to yield 25938 BTU output. The standard unit (without EPET thermostat or control section) is NEMA 4 rated. Available with heavy duty 16 ga. steel with gray epoxy textured powder coated finish.
| Hazardous Location Wall Convector TPI FEP76481RA Specifications |
|---|
| UPC | 686334445313 |
|---|
| Watts | 7600 |
|---|
| Btu's | 25938 |
|---|
| Volts | 480 |
|---|
| Amps | 15.8 |
|---|
| Cabinet Length | 58" |
|---|
| Weight | 85 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP76481RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats