Electric Convection Heaters - 7600W 3 Phase Hazardous Location Wall Convector - TPI FEP76483RA - 25938 BTU
The affordable way to keep things warm with this 3 Phase Hazardous Location Wall Convector made by TPI. Model FEP76483RA is efficiently gives 25938 BTU output by consuming just 7600 wattage. This model is heavy duty 16 ga. steel with gray epoxy textured powder coated finish. It has stainless steel cartridge element inserted into aluminum finned copper sheath. Wall mounting bracket supplied with this unit.
| Hazardous Location Wall Convector TPI FEP76483RA Specifications |
|---|
| UPC | 686334486255 |
|---|
| Watts | 7600 |
|---|
| Btu's | 25938 |
|---|
| Volts | 480 |
|---|
| Amps | 9.2 |
|---|
| Cabinet Length | 58" |
|---|
| Weight | 85 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP76483RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)