Electric Convection Heaters - 7600W Single Phase Hazardous Location Wall Convector - TPI FEP76571RA - 25938 BTU
Chase this high efficiency Single Phase Hazardous Location Wall Convector made by TPI. Model FEP76571RA is electric convection heater that gives amazing 25938 BTU output by consuming just 7600 wattage. This standard unit (without EPET thermostat or control section) is NEMA 4 rated. Available with stainless steel cartridge element inserted into aluminum finned copper sheath.
| Hazardous Location Wall Convector TPI FEP76571RA Specifications |
|---|
| UPC | 686334445320 |
|---|
| Watts | 7600 |
|---|
| Btu's | 25938 |
|---|
| Volts | 600 |
|---|
| Amps | 12.7 |
|---|
| Cabinet Length | 58" |
|---|
| Weight | 85 Lbs. |
|---|
Hazardous Location Wall Convector TPI FEP76571RA Features:
- Cabinet size 18" high, 9" wide
- Bottom In - Front Out air flow
- Wall mounting bracket supplied
- Heavy duty 16 ga. steel with gray epoxy textured powder coated finish
- 9" minimum clearance from bottom F heater to floor required
- Stainless steel cartridge element inserted into aluminum finned copper sheath
- Units can not be operated in room
- Standard unit (without EPET thermostat or control section) is NEMA 4 rated ambients exceeding 104 F (40 C)
- Units that exceed 22 Amps may not be controlled by line voltage thermostats