Get Heater Quote
Search:
Home > Heaters > Commercial Heaters > Electric Fan Forced Heaters >
Electric Horizontal Discharge Unit Heater TPI G1GUH05003 17100
Electric Horizontal Discharge Unit Heater TPI G1GUH05003 17100

Electric Horizontal Discharge Unit Heater TPI G1GUH05003 - 17100

Brand: TPI
SKU: G1GUH05003
Mfg Number:
  • BTU /hr.: 17100
  • Fuel Type: Electric
  • Volts: 277V
  • Dimensions: 20"L x 11"W x 13"H
Availability: In Stock Usually ships In 7-10 Business Days

Product Information
Retail: $724.00 Price: $398.20
 
You Save: $325.80 (45.0%)
Quantity:
Factory Installed Options:





Update price
Description

Electric Forced Air Heaters - 5000 W, 17100 BTU 20" Horizontal Discharge Unit Heater - TPI G1GUH05003

This is perfect choice for convenient and safe heat for your place. Buy Electric Forced Air Heaters made by TPI. Model G1GUH05003 is 5000 W, 20" Horizontal Discharge Unit Heater that yields an 17100 BTU output. The model comes with circular copper clad steel element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade. It has 18 ga. steel cabinet with powder coated finish and control compartment with a hinged and latched access door which simplify wiring installation and maintenance. The Fan assembly is enclosed by a heavy gauge, close spaced, chrome plated wire guard.

Horizontal Discharge Unit Heater - 17100 BTU - TPI G1GUH05003 Specifications
BTU17100
KW5 KW
TEMP RISE40 F
CFM400
Amps.18.1
Phase1 PH
Air throw26'
Voltage 277V
Control Volts277
Recommended Mounting Height Hortz9'
Product Dimension20"L x 11"W x 13"H
Weight36 Lbs.
UPC686334644730

Horizontal Discharge Unit Heater - 17100 BTU - TPI G1GUH05003 Features:

CONSTRUCTION:
  • 18 ga. steel cabinet with powder coated finish and control compartment with a hinged and latched access door, simplifying wiring installation & maintenance
HEATING ELEMENT:
  • Circular copper clad steel element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade
OVERHEAT PROTECTION:
  • This unit equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR:
  • Totally enclosed, single phase, permanently lubricated, thermally protected motors with this 5 kw unit.
  • Fan assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard.
LOUVER ASSEMBLY:
  • Louvers are individually adjustable for directional control of air flow and the louver assembly can be repositioned in the field from down air flow to right or left directional air flow.
INSTALLATION:
  • UH Series may be mounted at a maximum of 45 degrees off of horizontal
  • On all models up to 15 KW, 1/4" threaded rod may be used for mounting; on all models 20 KW and above 5/16" threaded rod may be used
  • Optional wall / ceiling mounting brackets available for all units
  • Suitable for applications up to 13,000 feet
FACTORY INSTALLED OPTIONS:
  • 24 volt transformer on 3 KW to 15KW units to convert from line voltage to low voltage remote thermostat operation (non CA1 models only)
  • Summer fan switch to operate the fan only.
  • Fan Delay Switch to purge all residual heat from the unit after the heating element has cycled off
  • Powder coated Epoxy finish is available
  • Disconnect switch
  • ETL listed
Specifications

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

Product PDF's and Other Resources

TPI Downflow Unit Heater G1GUH05003 Resources:

TPI Downflow Unit Heater G1GUH05003 Specification
Dimensions
20"L x 11"W x 13"H
Service Disabled Veteran Owned Small Business - pending | Minority Business Enterprise