Home > Heaters > Commercial Heaters > Electric Fan Forced Heaters >
Electric Horizontal Fan Forced Heater TPI H2HUH05C03 17100
Electric Horizontal Fan Forced Heater TPI H2HUH05C03 17100

Electric Horizontal Fan Forced Heater TPI H2HUH05C03 - 17100

Brand: TPI
SKU: H2HUH05C03
Mfg Number:
  • BTU /hr.: 17100
  • Fuel Type: Electric
  • Volts: 240 V
  • Dimensions: 13"H x 20"W x 11"D
Availability: Out of Stock
notify me

Product Information
Retail: $724.00 Price: $398.20
 
You Save: $325.80 (45.0%)

Factory Installed Options:

Update price
Description

Forced Air Heaters - TPI 5KW 240V 13" Horizontal Discharge Fan Forced Unit Heater - 17100 BTU - H2HUH05C03

Highly efficient and cost effective Forced Air Heaters made by TPI. Model H2HUH05C03 is 5KW and 240V heater. This 13" Horizontal Discharge Fan Forced Unit Heater gives 17100 BTU output. Featuring 18 ga. steel cabinet with powder coated finish and control compartment with a hinged and latched access door, simplifying wiring installation for maintenance.

13" Horizontal Discharge Fan Forced Unit Heater - TPI H2HUH05C03 Specifications
KW5
BTU'S17100
VOLTS240
PH1 or 3
AMPS20.8 / 12.1
CONTROL VOLTS240
TEMP RISE ?F40 F
AIR THROW26'
CFM400
RECOM'D MOUNTING HT9'
Weight44 Lbs.
Dimension13"H x 20"W x 11"D
UPC686334644945

13" Horizontal Discharge Fan Forced Unit Heater - TPI H2HUH05C03 Features

CONSTRUCTION:
  • 18 ga. steel cabinet with powder coated finish and control compartment with a hinged and latched access door, simplifying wiring installation & maintenance
HEATING ELEMENT:
  • Circular copper clad steel element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade
OVERHEAT PROTECTION: This unit equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur.FAN and MOTOR:
  • Totally enclosed, single phase, permanently lubricated, thermally protected motors with this 10 kw unit.
  • Fan assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard.
LOUVER ASSEMBLY:
  • Louvers are individually adjustable for directional control of air flow and the louver assembly can be repositioned in the field from down air flow to right or left directional air flow.
INSTALLATION:
  • UH Series may be mounted at a maximum of 45 degrees off of horizontal
  • On all models up to 15 KW, 1/4" threaded rod may be used for mounting; on all models 20 KW and above 5/16" threaded rod may be used
  • Optional wall / ceiling mounting brackets available for all units
  • Suitable for applications up to 13, 000 feet
FACTORY INSTALLED OPTIONS:
  • 24 volt transformer on 3 KW to 15KW units to convert from line voltage to low voltage remote thermostat operation (non CA1 models only)
  • Summer fan switch to operate the fan only.
  • Fan Delay Switch to purge all residual heat from the unit after the heating element has cycled off
  • Powder coated Epoxy finish is available - consult factory
  • Disconnect switch
  • ETL listed
Specifications

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

Product PDF's and Other Resources

TPI Horizontal Fan Forced Heater H2HUH05C03 Resources:

TPI Horizontal Fan Forced Heater H2HUH05C03 Specification
Dimensions
13"H x 20"W x 11"D
RELATED PRODUCTS
Electric Hazardous Location Fan Forced Unit Heater TPI HLA2048036025.024 85400 btu's

Price: $6,692.40

Electric Explosion Proof Heater Qmark GUX3004832 10236 btu

Price: $5,448.00

Electric Horizontal Fan Forced Heater TPI P3PUH20CA1 68300 btu's

Price: $1,645.05

Service Disabled Veteran Owned Small Business - pending | Minority Business Enterprise