Home > Heaters > Commercial Heaters > Electric Fan Forced Heaters >
Electric Horizontal Fan Forced Heater TPI P3PUH07CA1 25600 btu's
Electric Horizontal Fan Forced Heater TPI P3PUH07CA1 25600 btu's

Electric Horizontal Fan Forced Heater TPI P3PUH07CA1 - 25600 btu's

Brand: TPI
SKU: P3PUH07CA1
Mfg Number:
  • BTU /hr.: 25600 btu's
  • Fuel Type: Electric
  • Volts: 480 V
  • Dimensions: 20"W x 11"D x 13"H
Availability: Out of Stock
notify me

Product Information
Retail: $1,204.00 Price: $662.20
 
You Save: $541.80 (45.0%)

Factory Installed Options:

Update price
Description

Fan Forced Horizontal Discharge Unit Heater is the best unit to get perfect and even warmth this winter. This multi featured unit P3PUH07CA1, comes with 18 ga. steel cabinet to assure long term durability. This versatile heater knows its job very well. It is simple and easy to use with its features like summer fan switch to operate the fan only, fan Delay Switch etc.

TPI Fan Forced Horizontal Discharge Unit Heater - P3PUH07CA1 Specifications
Wattage7.5 KW
BTU's25600 BTU
VOLTS480V
Phase3 Ph
AMPS9.1
Control Voltage24
Temp Rise deg F42 F
Air Throw36'
CFM575
Recom'd Mounting Ht.9'
Dimension20"W x 11"D x 13"H
Weight44 lbs.
UPC686334644891
ListedETL Listed

Fan Forced Horizontal Discharge Unit Heater - P3PUH07CA1 Features:

CONSTRUCTION:

  • 18 ga. steel cabinet with powder coated finish and control compartment with a hinged and latched access door, simplifying wiring installation & maintenance

HEATING ELEMENT:

  • Circular copper clad steel element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade

OVERHEAT PROTECTION:

  • Equipped with automatic reset type limit controls to de-energize the

FAN and MOTOR:

  • Heater should an over-temperature situation occur.
  • Totally enclosed, single phase, permanently lubricated, thermally protected motors
  • Fan assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard.

LOUVER ASSEMBLY:

  • Louvers are individually adjustable for directional control of air flow and the louver assembly can be repositioned in the field from down air flow to right or left directional air flow.

TEMPERATURE CONTROLS:

  • 20 KW through 48 KW units and all 480V have built in 24 volt transformer for low voltage remote thermostat application
  • 25 KW through 48 KW models available in 2-stage on special order

INSTALLATION:

  • UH Series may be mounted at a maximum of 45 degrees off of horizontal
  • On all models up to 15 KW, 1/4" threaded rod may be used for mounting; on all models 20 KW and above 5/16" threaded rod may be used
  • Optional wall / ceiling mounting brackets available for all units
  • Suitable for applications up to 13,000 feet

FACTORY INSTALLED OPTIONS:

  • 24 volt transformer on 3 KW to 15KW units to convert from line voltage to low voltage remote thermostat operation (non CA1 models only)
  • Summer fan switch to operate the fan only.
  • Fan Delay Switch to purge all residual heat from the unit after the heating element has cycled off
  • Powder coated Epoxy finish is available -
  • Disconnect switch
Specifications

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

Product PDF's and Other Resources

TPI Fan Forced Horizontal Discharge Unit Heater P3PUH07CA1 Resources:

TPI Fan Forced Horizontal Discharge Unit Heater P3PUH07CA1 Specifications
Dimensions
20"W x 11"D x 13"H
RELATED PRODUCTS
Electric Horizontal Fan Forced Heater TPI F1FUH07CA1 25600 BTU's

Price: $613.80

Electric Hazardous Location Fan Forced Unit Heater TPI HLA122083607.524 25600 btu's

Price: $5,361.95

Electric Horizontal Fan Forced Heater TPI F1FUH20CA1 68300 BTU's

Price: $1,645.05

Service Disabled Veteran Owned Small Business - pending | Minority Business Enterprise