Get Heater Quote
Search:
Home > Heaters > Commercial Heaters > Electric Fan Forced Heaters >
Electric Horizontal Fan Forced Heater TPI H3HUH30CA1 102390
Electric Horizontal Fan Forced Heater TPI H3HUH30CA1 102390

Electric Horizontal Fan Forced Heater TPI H3HUH30CA1 - 102390

Brand: TPI
SKU: H3HUH30CA1
Mfg Number:
  • BTU /hr.: 102390
  • Fuel Type: Electric
  • Volts: 240 V
  • Dimensions: 17"L x 17"W x 24"H
Availability: In Stock Usually ships In 7-10 Business Days

Product Information
Retail: $4,081.00 Price: $2,244.55
 
You Save: $1,836.45 (45.0%)
Quantity:
Factory Installed Options:




Update price
Description

Forced Air HeatersTPI 30 KW, 240V Fan Forced Horizontal Discharge Unit Heater - H3HUH30CA1

Presenting 30 KW Fan Forced Horizontal Discharge Unit Heater with 102390 BTU and powder coated epoxy finish. TPI H3HUH30CA1 is equipped with 18 ga. steel cabinet with powder coated finish and control compartment with a hinged and latched access door simplifying wiring, installation and maintenance. Totally enclosed, single phase, permanently lubricated and thermally protected motors come with sleeve bearings and mounted with rubber insulators that minimizes vibration and noise.

Fan Forced Horizontal Discharge Unit Heater - TPI H3HUH30CA1 Specifications
Wattage30 KW
BTU102390
Voltage240
Phase3
Ampere72.3
Control Voltage24
Temperature Rise70 F
Air Throw56'
CFM1350
Required Mounting Height13'
Dimensions17"L x 17"W x 24"H
Weight60 Lbs.
UPC686334688482

Fan Forced Horizontal Discharge Unit Heater - TPI H3HUH30CA1 Features:

CONSTRUCTION:

  • 18 ga. steel cabinet with powder coated finish and control compartment with a hinged and latched access door, simplifying wiring installation & maintenance

HEATING ELEMENT:

  • Circular copper clad steel element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade

OVERHEAT PROTECTION:

  • All units come equipped with automatic reset type limit controls to de-energize the

FAN and MOTOR:

  • Heater should an over-temperature situation occur. Totally enclosed, single phase, permanently lubricated, thermally protected motors with unit bearings and mounted with rubber insulators to minimize vibration and noise
  • Fan assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard.

LOUVER ASSEMBLY:

  • Louvers are individually adjustable for directional control of air flow and the louver assembly can be repositioned in the field from down air flow to right or left directional air flow.

TEMPERATURE CONTROLS:

  • 20 KW through 48 KW units and all 480V have built in 24 volt transformer for low voltage remote thermostat application

INSTALLATION:

  • UH Series may be mounted at a maximum of 45 degrees off of horizontal
  • model has mounting above 5/16" threaded rod
  • Optional wall / ceiling mounting brackets available for all units
  • Suitable for applications up to 13, 000 feet

FACTORY INSTALLED OPTIONS:

  • Summer fan switch to operate the fan only.
  • Fan Delay Switch to purge all residual heat from the unit after the heating element has cycled off
  • Powder coated Epoxy finish is available
  • Disconnect switch
Specifications

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

Product PDF's and Other Resources

TPI Horizontal Fan Forced Heater H3HUH30CA1 Resources:

TPI Horizontal Fan Forced Heater H3HUH30CA1 Specification
Dimensions
17"L x 17"W x 24"H
Service Disabled Veteran Owned Small Business - pending | Minority Business Enterprise