Get Heater Quote
Search:
Home > Heaters > Commercial Heaters > Electric Fan Forced Heaters >
Electric Horizontal Fan Forced Heater TPI F1FUH03003 11200 BTU's
Electric Horizontal Fan Forced Heater TPI F1FUH03003 11200 BTU's

Electric Horizontal Fan Forced Heater TPI F1FUH03003 - 11200 BTU's

Brand: TPI
SKU: F1FUH03003
Mfg Number:
  • BTU /hr.: 11200 BTU's
  • Fuel Type: Electric
  • Volts: 208V
  • Dimensions: 20 x 11 x 13
Availability: In Stock Usually ships In 7-10 Business Days

Product Information
Retail: $693.00 Price: $381.15
 
You Save: $311.85 (45.0%)
Quantity:
Factory Installed Options:






Update price
Description

We have 3.3KW Single Pole UH Series Unit Heater manufactured by TPI. Model no F1FUH03003 has continuously brazed steel fins formed to match the air delivery pattern of the fan blade. Fan assembly is enclosed by a heavy gauge, closed space with chrome plated wire guards. Louvers are individually adjustable for direction control of air flow. Automatic reset type limit controls for overheat protection. Totally enclosed, single phase permanently lubricated and thermally protected motor is mounted on rubber insulators to minimize vibration and noise.

TPI 3.3KW Single Pole UH Series Unit Heater F1FUH03003 Specifications
Power3.3 KW
BTU's11200
Volts208
Phase1
Amps15.9
Control Volts208
Temp Rise26 F
CFM400
Air Throw26'
Weight36 Lbs.
Recommended Mounting Ht.9'
UPC686334644600

TPI 3.3KW Single Pole UH Series Unit Heater F1FUH03003 Features:

    CONSTRUCTION:
  • Heavy gauge welded steel cabinet with powder coated finish and control compartment with a hinged and latched access door, simplifying wiring installation & maintenance.
  • HEATING ELEMENT:
  • Circular copper clad steel element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade
  • OVERHEAT PROTECTION:
  • Comes equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur.
  • FAN and MOTOR:
  • Totally enclosed, single phase, permanently lubricated, thermally protected motors with unit bearing. Fan assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard.
  • LOUVER ASSEMBLY:
  • Louver is individually adjustable for directional control of air flow and the louver assembly can be repositioned in the field from down air flow to right or left directional air flow.
  • INSTALLATION:
  • This ETL listed heater can be mounted with the motor shaft from horizontal to downward at 45 degrees off horizontal. Pre-drilled holes and installed threaded nuts provided to allow hanging by 1/4" threaded rod. Optional wall / ceiling mounting brackets are available for this unit.
  • For applications above 6000 feet.
  • FACTORY INSTALLED OPTIONS:
  • 24 volt transformer to convert from line voltage to low voltage remote thermostat operation
  • Summer fan switch to operate the fan only.
  • Fan Delay Switch to purge all residual heat from the unit after the heating element has cycled off.
  • Powder coated epoxy finish for corrosive atmospheres.
  • Disconnect switch
  • Note: Louver assembly is square and mounted with screws. Louver can be removed and repositioned for four (4) directional air flow - left - right - up - down with the heater in the horizontal position.
Specifications

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

Product PDF's and Other Resources

TPI Horizontal Fan Forced Heater F1FUH03003 Resources:

TPI Horizontal Fan Forced Heater F1FUH03003 Specifications
Dimensions
20 x 11 x 13
Service Disabled Veteran Owned Small Business - pending | Minority Business Enterprise