Get Heater Quote
Search:
Home > Heaters > Commercial Heaters > Electric Fan Forced Heaters >
Electric Horizontal Fan Forced Heater TPI F1FUH20CA1 68300 BTU's
Electric Horizontal Fan Forced Heater TPI F1FUH20CA1 68300 BTU's

Electric Horizontal Fan Forced Heater TPI F1FUH20CA1 - 68300 BTU's

Brand: TPI
SKU: F1FUH20CA1
Mfg Number:
  • BTU /hr.: 68300 BTU's
  • Fuel Type: Electric
  • Volts: 208V
  • Dimensions: 24 x 17 x 17
Availability: In Stock Usually ships In 7-10 Business Days

Product Information
Retail: $2,991.00 Price: $1,645.05
 
You Save: $1,345.95 (45.0%)
Quantity:
Factory Installed Options:




Update price
Description

Presenting 20KW Single Pole UH Series Unit Heater brought to you by TPI. Model no F1FUH20CA1 is made using 18 gauge steel cabinet with powder coated finish. Control compartment includes a hinged and latched access door for easy wiring installation and maintenance. Circular copper clad steel heating element has continuously brazed steel fins formed to match the air delivery pattern of the fan blade.

TPI 20KW Single Pole UH Series Unit Heater F1FUH20CA1 Specifications
Power20 KW
BTU's68300
Volts208
Phase1
Amps96.2
Control Volts24
Temp Rise47 F
CFM1350
Air Throw56'
Weight55 Lbs.
Recommended Mounting Ht.13'
UPC686334688307

TPI 20KW Single Pole UH Series Unit Heater F1FUH20CA1 Features:

TPI 20KW Single Pole UH Series Unit Heater F1FUH20CA1 Features:

    CONSTRUCTION:
  • Heavy gauge welded steel cabinet with powder coated finish and control compartment with a hinged and latched access door, simplifying wiring installation & maintenance.
  • HEATING ELEMENT:
  • Circular copper clad steel element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade
  • OVERHEAT PROTECTION:
  • Comes equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur.
  • FAN and MOTOR:
  • Totally enclosed, single phase, permanently lubricated, thermally protected motors with sleeve bearing, mounted with rubber insulators to minimize vibration and noise. Fan assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard.
  • LOUVER ASSEMBLY:
  • Louver is individually adjustable for directional control of air flow and the louver assembly can be repositioned in the field from down air flow to right or left directional air flow.
  • TEMPERATURE CONTROLS:
  • Has built in 24 Volt transformer for low voltage remote thermostat application. Available in 2-stage on special order (consult factory).
  • INSTALLATION:
  • This ETL listed heater can be mounted with the motor shaft from horizontal to downward at 45 degrees off horizontal. Pre-drilled holes and installed threaded nuts provided to allow hanging by 5/16" threaded rod. Optional wall / ceiling mounting brackets are available for this unit.
  • For applications above 6000 feet.
  • FACTORY INSTALLED OPTIONS:
  • Summer fan switch to operate the fan only.
  • Fan Delay Switch to purge all residual heat from the unit after the heating element has cycled off. Includes contactor and transformer.
  • Powder coated epoxy finish for corrosive atmospheres.
  • Disconnect switch
  • Note: Louver assembly is square and mounted with screws. Louver can be removed and repositioned for four (4) directional air flow - left - right - up - down with the heater in the horizontal position.
Specifications

Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.

Product PDF's and Other Resources

TPI Horizontal Fan Forced Heater F1FUH20CA1 Resources:

TPI Horizontal Fan Forced Heater F1FUH20CA1 Specifications
Dimensions
24 x 17 x 17
Service Disabled Veteran Owned Small Business - pending | Minority Business Enterprise