SKU: HF1B5103N
Mfg Number:
- BTU /hr.: 11.2 / 8.5 btu's
- Fuel Type: Electric
- Volts: 240 / 208 V
- Dimensions: 14-15/32"W x 6-1/2"D x 17-3/4"H
Availability: In Stock Usually ships In 7-10 Business Days
Product Information
Retail: $693.00
Price: $381.15
You Save: $311.85 (45.0%)
Control:
Update price
Horizontal / Vertical Discharge Fan Forced Suspended Unit Heater comes with 3300 / 2500 W and 11.2 / 8.5 BTU/Hr. TPI HF1B5103N is equipped with 18 ga. steel cabinet with powder coated finish, a control compartment housing a master terminal board with a hinged and latched access door and spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow. The optional low voltage and line voltage thermostats are available with an adjustable temperature range of 50-90 deg. F.
| Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF1B5103N Specifications |
|---|
| BTU | 11.2 / 8.5 |
|---|
| Wattage | 3300 / 2500 W |
|---|
| Voltage | 240 / 208 V |
|---|
| Control Volts | 240 / 208 V |
|---|
| Product Weight | 25 Lbs. |
|---|
| Product Dimensions | 14-15/32"W x 6-1/2"D x 17-3/4"H |
|---|
| Phase | 1 |
|---|
| Temperature Rise | 26 F |
|---|
| CFM | 400 |
|---|
| Amperage | 13.7 / 11.9 |
|---|
| Air Throw | 12' |
|---|
| Recommended Mounting Height | 9' Hortz.
9' Vert. |
|---|
| UPC | 686334645102 |
|---|
Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF1B5103N Features:
CONSTRUCTION: - 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
HEATING ELEMENT: - Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow
OVERHEAT PROTECTION: - Equipped with automatic reset type limit to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR: - Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motor with unit bearings
- Fan over-ride purges unit of residual heat at shutdown
LOUVER ASSEMBLY: - Louvers are individually adjustable for directional control of air flow up to 15 deg. from straight horizontal
- Optional diffusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS: - Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50-90 deg. F
INSTALLATION: - It can be mounted for horizontal or vertical discharge
- Suggested for applications up to 6000 feet
FIELD INSTALLED OPTIONS: - In-Built or wall mounted temperature control thermostats - low or line voltage
- Summer fan switch to operate the fan only.
- Power disconnect switch
- Heat stratification thermostat
- cETLus listed
Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.
14-15/32"W x 6-1/2"D x 17-3/4"H